Wireless Backup Camera 1 Set 5 inch TFT LCD Car Monitor Reversing with Rear View For Any car | Автомобили и мотоциклы

Wireless Backup Camera 1 Set 5 inch TFT LCD Car Monitor Reversing with Rear View For Any car | Автомобили и мотоциклы

Specification:

Brand new Housing Material: ABS Color: Black Screen Size: 5 inch Resolution: 800*480 Standard: PAL/NTSC Video in: AV1/AV2 Aspect Ratio: 4:3 Power Supply: DC 12V Brightness: 300 nits Contrast: 250:1

Transmitter and Receiver:

Work Range: Up to about 10m(Hollowness) Power: DC 12V Transmitter/Receiver Cable Length:1.4m

Review Camera:

Sensor: PC7080 1/3 Inch Color TV system: NTSC Effective pixels: 628 X 582 pixels Scanning System: 2:1 Interlace Sync System: Internal Resolution: 520 TV lines Lens Angle: 2.8mm/120°- 1.8mm/170° Sensor Area: 5.961mm x 4.276mm Video Output: 1.0 VP-P,75 OHM S/N Ratio: More than 48db Water-proof: IP67-IP68 Minimum Illumination: 0.2Lux/F1.8 (0Lux with LED) Power Supply: DC 12V Operation Temperature: -20℃-60℃ (RH95% Max.) Storage Temperature: -30℃-60℃ (RH95% Max.)

Feature:

Full color TFT LCD display. Supports Car Camera, DVD, VCD, STB, Satellite receiver, and other video equipments With 2 road video input port, white video cable connects to car rearview camera, the yellow one connects to DVD or VCD, White video cable is priority signal input, when 2 road has signal input, the machine will prioritize the white end signal. Waterproof car rear view camera. Night vision LED. Fine workmanship and good performance. Easy to install. Convenient to use. Long service life.

How to Use:

1. Take out your stock license plate light at the back of your car. 2. Fix the camera to where the stock license plate light was. 3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power. 4. Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power. 5. Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative. 6. Connect the wireless module (receiver) to your car monitor - yellow plug for AV input. 7. Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative. 8. You will see the images when your car is in reverse shift.