5000W Solar power inverter Hybrid Pure Sine-wave Inverters with AC Charger 80A MPPT Controller DC48V to AC220V/230V/240V | Обустройство

5000W Solar power inverter Hybrid Pure Sine-wave Inverters with AC Charger 80A MPPT Controller DC48V to AC220V/230V/240V | Обустройство

Overview:

HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.

Feature:

1.Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.

2.Two output modes: mains bypass and inverter output; uninterrupted power supply.

3.Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.

4.Advanced MPPT technology with an efficiency of 99.9%.

5.Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.

6.ON/OFF rocker switch for AC output control.

7.Power saving mode available to reduce no-load loss.

8.Intelligent variable speed fan to efficiently dissipate heat and extend system life.

9.Lithium battery activation design, allowing access of lead-acid battery and lithium battery.

10.360 ° all-round protection with a number of protection functions.

11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.

2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.

3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.

4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.

5. All-in-one solar charge inverter: The energy conversion unit of the whole system.

Charging mode:

1) PV priority: PV module will charge the battery preferentially, and the battery is charged by the Mains only when the PV system fails. During the day, solar energy is fully used to charge, while at night, it converts to the Mains. This can maintain battery level, and is ideal for areas where the grid is relatively stable and electricity price is relatively high.

2) Mains priority: The Mains supply is preferentially used to charge the battery. Only when the Mains fails, the PV charging can be activated.

3)Hybrid charging: PV and mains hybrid charging. PV MPPT charging is a priority, and when PV energy is insufficient, the mains supply supplements. When the PV energy is sufficient again, the mains stops charging. This is the fastest charging mode, suitable for the areas where power grid is unstable, providing sufficient backup power supply at any time.

4)Only Solar (Only Solar): Only PV charging, without Mains charging. This is the most energy-efficient way in which battery is charged only by solar panels, and is usually used in areas with good lighting conditions.

Technical parameters:

Models

HF4830S60

HF4840S60

HF4850S80

HF4825U60

HF4830U60

HF4835U80

Mains mode

Rated input voltage

220/230Vac

110/120Vac

Input voltage range

(170Vac~280Vac) ±2%
(90Vac-280Vac) ±2%

(90Vac~140Vac) ±2%

Frequency

50Hz/ 60Hz (Auto detection)

Overload/short circuit protection

Circuit breaker

Efficiency

>95%

Conversion time (bypass and inverter)

10ms (typical)

AC reverse protection

Available

Maximum bypass overload
current

40A

Inverter mode

Output voltage waveform

Pure sine wave

Rated output power (W)

3000

4000

5000

2500

3000

3500

Power factor

1

Rated output voltage (Vac)

230Vac

120Vac

Output frequency

50hz/60hz

Peak power

6000VA

8000VA

10000VA

5000VA

6000VA

7000VA

Loaded motor capability

2HP

3HP

4HP

1HP

1HP

2HP

Output short circuit protection

Circuit breaker

Bypass breaker specifications

40A

Rated battery input voltage

48V (Minimum starting voltage 44V)

Mains charging

Battery type

Lead acid or lithium battery

Maximum charge current

60A

30A

Charge voltage range

40 –58Vdc

40 –60Vdc

Short circuit protection

Circuit breaker and blown fuse

Circuit breaker specifications

40A

Overcharge protection

Alarm and turn off charging after 1 minute

PV charging

Maximum PV open circuit voltage

145Vdc

PV operating voltage range

60-145Vdc

MPPT voltage range

60-115Vdc

Battery voltage range

40-60Vdc

Maximum output power

3200W

4200W

3200W

4200W

PV charging current range
(can be set)

0-60A

0-80A

0-60A

0-80A

Charging short circuit protection

Blown fuse

Wiring protection

Reverse polarity protection

Certified specifications

Certification

CE(EN62040-1)

EMC certification level

EN62040-2, C2

Operating temperature range

-15°C to 55°C

Storage temperature range

-25°C ~ 60°C

Humidity range

5% to 95% (Conformal coating protection)

Noise

≤60dB

Heat dissipation

Forced air cooling, variable speed of fan

Communication interface

USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control

Size (L*W*D)

430mm*338mm*126mm

Weight (kg)

10

Buy Now

Click here

Click here

Photos: