ANCEL DP500 Car Key Programmer Immobilizer Cluster Calibriation Reset EEPROM Chip Read Professional OBD2 Auto Diagnostic Tools | Автомобили

ANCEL DP500 Car Key Programmer Immobilizer Cluster Calibriation Reset EEPROM Chip Read Professional OBD2 Auto Diagnostic Tools | Автомобили

ANCEL DP500 Car Key Programmer Immobilizer Cluster Calibriation Reset EEPROM Chip Read Professional OBD2 Auto Diagnostic Tools

DP500 is a new Android-based vehicle trouble diagnostic device developed for internet applications. Contains key programming,Cluster Calibriation, oil/service reset and special functions like ABS bleed, gear learning,EPB, TPS, SRS reset etc; It covers wide range of vehicles, featured powerful function, and provides precise result.All-in-one machine structure, more convenient to use, full optimization hardware, running more stable, faster and smoother.

Why choose ANCEL DP500?

1.Cluster Calibriation--Write/Read cluster,Read/Write EEPROM,Read/Write Flash
2.Key Programming--Add/Erase Key,All Key Lost Programming,Programming Remote,Key Numbers Reading,Reading Pin Code ,Reading EEPROM Chip,Remote Matching
3.Multi-language:English,Spanish,Polish,Portuguese,French, German,Italian,Russian
4.7 inches Android Tablet
5.11 Special Function:Oil Reset Service,ABS Bleeding,Gear Learning,CVT Reset,Battery Match,EPB Adaptation,TPS Adaptation,Steering Angle Reset,DPF Regeneration,Injector Coding,Suspension Matching
6.Remote Assistance
7.One Click Free Update via WIFI
8.The update cycle is short and fast

ANCEL DP500 Key Programming Function

Add/Erase Keys
All Key Lost Programming
Programming Remote
Key Numbers Reading
Reading Pin Code
Reading EEPROM Chip
Remote Matching
Reset ECM

ANCEL DP500 Professional Cluster Reset Master

Read Odometer
Write Odometer
Read Flash
Write Flash
Read EEPROM

Please Note:

The main function of our device is key programming and cluster calibration. If you need professional special function device, please contact us

11 Special Function

1.Oil Reset

The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset the mileage or driving time to zero after the maintenance,so the maintenance light will go out and the system will start a new maintenance cycle.

2.ABS Bleeding

When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.

3.CVT Reset

This function is used to reset the compensation code and intialize the ECT after a solenoid value or value body assembly has been replaced

4.Gear Learning

Crankshaft position sensor adaptive learning.

5.Battery Matching

This function enables you to perform a resetting operation on the monitoring unit of vehicle battery,in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
a)Main battery is replaced.Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information.If the related control module detects false information,it will invalidate some electric auxiliary functios,such as automatic start&stop function,sunroof without one-key trigger function,power window without automatic function.
b)Battery monitoring sensor.Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately,which can avoid an error message displaying on the instrument panel.

6.EPB Adaptation

it is important in the maintenance of electronic braking systemrsquos safety and efficiency when replace brake pad or motor

7.TPS Reset

vehicle's throttle position system sensor connected to the butterfly spindle and is primarily used to monitor the throttle position within an inner combustion engine. Due to its location, the throttle position sensor is able to effectively observe where the throttle butterfly valve is positioned.

8.Steering Angle Reset

To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor ,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.

9.DPF Regeneration

DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance.
DPF regeneration may be performed in the following cases:
a)The exhaust back pressure sensor is replaced.
b)The PM trap is removed or replaced
c)The fuel additive nozzle is removed or replaced
d)The cataytic oxidizer is removed or replaced.
e)The DPF regeneration MIL is on and maintenance is performed.
f)The DPF regeneration control module is replaced.

10.Injector Coding

diesel injector code need programming ID and parameters to the ECU for accurate communication and Injection control system.

11.Suspension Matching

This function can adjust the height of the body.When replacing the body height sensor in the air suspension system,or coontrol module or when the vehicle level is incorrect,you need to perform this function to adjust the body height sensor for level calibration.

ANCEL DP500 Supported Multi-languages

English,Spanish,Polish,Portuguese,French, German,Italian,Russian.

PLEASE NOTE:

The default language of the device is English, if you need to use other languages, please contact us and provide your product serial number, we will contact the engineer to open the language for you, thank you.

ANCEL DP500 Support Model List

For Key Programming Supported Model

for Benz,for BMW,for BYD,for Chery,for Cowin

for Jetour,for Chrysler,for Dodge,for Jeep,for Daewoo,for Fiat

for IVECO,for Ford,for LINCOLN,for Mercury,for Geely,for Maple,for Englon

for GM,for Great Wall,for Honda,for Acura,for Hyundai,for Genesis,for ISUZU

for Jaguar,for KIA,for Land Rover,for Luxgen,for Mazda,for Mitsubishi,for Nissan

for Infiniti,for Opel,for Peugeot,for Citroen,for DS,for Porsche,for Renault,for Dacia

for ROEWE,for MG,for Smart,for Ssangyong,for Subaru,for SUZUKI,for Toyota,for Lexus,for Volvo,for VW,for ZOTYE.


Key Programming Highlights
-Ford EXPLORER/EXPLORER SPORT/TRANSIT CUSTOM/RANGER/FUSION etc supports up to 2019 -Renault CLIO/CAPTURE/DUSTER/KOLEOS etc supports up to 2015 -GM EQUINOX/MALIBU/TERRAIN supports to 2020 -GM CASCADA/ENCLAVE/REGAL/ESCALADE/CAMARO/IMPALA etc supports up to 2019 -Hyundai ACCENT/ELANTRA SEDAN/G90/GENESIS/KONA/SONATA etc supports up to 2019 -Landrover DISCOVERY 4/RANGE ROVER/RANGE ROVER EVOQUE supports up to 2015
-Volvo S60/V40/XC60 supports to 2017 -MAZDA MAZDA 6/MAZDA CX-3/MAZDA CX-5 etc supports up to 2018

For Cluster Calibriation Supported Model

for ALFA,for Benz,for Chrysler,for Fiat,for GM,for Hyundai,for KIA,for IVECO

for Land Rover,for Jaguar,for Mazda,for Infiniti,for Opel,for Peugeot,for Citroen

for Porsche,for Renault,for Smart,for Ssangyong,for SUZUKI,for Toyota,for Lexus,for Volvo,for VW,for BESTURN,for PROTON



Cluster Calibriation Highlights:
-Chrysler 300C/PACIFICA/CHALLENGER/CHARGER/DURANGO/RAM etc supports up to 2018 -Ford F250/F350/F450/F550/FIGO/ASPIRE/KA supports up to 2018 -Renault CAPTUR/CLIO/TRAFIC IV supports up to 2017
-GM TRAILBLAZER supports up to 2019
-GM ESCALADE / XTS / COLORADO supports up to 2018 -Support part of ALFA/Porsche cluster calibriation

Note:

1.not support luxury brands key programming function

2.Even though it compatible with most cars, but different regions support the vehicle list at different times, or some car is special design, so it may not compatible with some car, please Leave us message in below format, we will reply you within 24 hours. for example : for Audi A4 2005, 2.0cc diesel

One-click WIFI Update Via Wifi

Remote Assistance

This application can realize remote hosting operation via the Third Party's software:Quick Support.

Product Specifications:

Operation System: Android 5.1.1
CPU: RK3128 Quad-core, ARM Cortex A7@1.2Ghz
Battery: 3800mA, rechargeable polymer lithium battery
Extension memory card: 32G Micro SD (TF) card supported
Storage capacity: 16GB
LCD：7 inch
LCD resolution: 800*480
Touch screen: capacitive touch screen
Wifi: supported
Working temperature: -20℃～55℃（14℉～131℉）
Storage temperature: -20℃～70℃（-4℉～158℉）
Weight: 850g
Dimension: 245*149*35mm

Product Detail

EU Version

US Version