3pcs rubber pinch roller wheel for Roland Cutting plotter paper pressure | Компьютеры и офис

3pcs rubber pinch roller wheel for Roland Cutting plotter paper pressure | Компьютеры и офис

Product Description:

1. Suitable for Graphtec/Roland Cutting Plotter

2. High quality and Extra long life. 

3. Roller size: 

Hole diameter: 4mm   

Outside diameter: 16mm    

Height: 11mm

4. With bearing balls inside the roller, can let the vinyl materials move smoothly.

5. Package included:

   3 x Pinch Roller

Pinch roller maintenance:

1, the pinch roller in use should always be clean, because pinch roller is easy to self-adhesive adhesive on it. Pinch roller generally are rubber, so just wipe with a damp cloth, such as too sticky, cotton dipped in alcohol wipe can also be used.

2, the pressure of pinch roller should not arbitrarily self-regulation, in the absence of easily lead to uneven pressure gauge, resulting in easy road.

3, when paper deviate more and more serious and has made cleaning pinch roller is still not resolved, then consider replacing the Pinch roller. Replace the pinch roller must have changed a few, old and new pinch roller due to the friction coefficient of different, such as mix will cause paper to go the wrong.

4. Do not put the paper when the pinch roller pressed down, or pressure the wheel is worn. Be sure to use press roller with the original specifications of the same. Usually to promptly clean up glue stick to paper dust on the wheels, to extend the service life of the wheels.