Комфортмат Сайленс Бронзе 3 с шумоизоляцией вибрации авто, набор из 5 листов 50х70 см, шум включен.

Комфортмат Сайленс Бронзе 3 с шумоизоляцией вибрации авто набор из 5 листов 50х70 см шум включен.

Comfortmat bronze 3-Vibrating absorbing material of a new series of materials silence. Used to reduce vibration in medium load zones

Specifications:

Thickness, mm-3

Sheet size, mm-500 x 700

ILC, U. E. -0,33

Sheet weight, KD-1, 96

Unit weight, kg/m2-5, 6

Adhesion, n/CM-6

Number of sheets per pack-10

Moisture resistance material-Yes

Vibration insulation is used by the first layer in places where it is necessary to extinguish the oscillation of metal surfaces.

For car floor-Protects the paint layer from dust, dirt and possible condensate, which can cause corrosion. Improves wireframe, isolates noise coming from road, exhaust system, engine and other sources.

For car arches (wings inside the cabin)-Reduces the noise level from the road, rubble, gravel and stones falling into the metal arches of the car, the wheels working the car suspension. It becomes quieter and more comfortable.

For trunk floor-The sound is muffled from the rear wheels and the noise of the exhaust pipe, the muffler. Protects the paint layer from dust, dirt and possible condensate that can cause corrosion.

For car doors-Improves the closure, the sound when closed becomes muffled, like premium cars.

Vibrating materials comfortable silence bronze 3 have a mastic layer, which can be used without the use of additional adhesive materials. This layer is protected by special anti-adhesive paper, which is easily removed, after which the material becomes ready for installation work.

For simplicity and added convenience when cutting the material on the foil surface, an embossing in the form of cells is applied.

The cutting of the material is carried out in protective gloves to prevent cuts against the edge of the foil surface.

For improved sticking to the surface, the mastic layer is desirable to mount at a temperature of 15 to 25 degrees Celsius. In a cold period of time, you can use the mounting hairdryer. The place of installation is also recommended to warm up.

Apply the material to a clean skimmed surface. You can dehydrate with any means that does not contain the wax base (you can not process kerosene and gasoline).

Vibrating absorbing material needs to be well rolled with a roller or similar tools, to kick out the air layer from the mastic layer. The material should be completely tightly located on the surface, because. Under it may form condensate. You need to roll until the cells on the foil are not ironed.

Installation of the vibration insulation material comfortmat silence bronze 3 it is recommended to apply the joint to the joint or with a small indent from each other. If you want to paste the material, the place of overlay of two layers should also be carefully rolled.