Minco Heat DBRK EU Вилка с Переключателем Питания Саморегулирующийся Тепловой Кабель для Защиты от Замерзания Водопроводных Труб 1~10м Теплый Провод Вкл.

Minco Heat DBRK EU Вилка с Переключателем Питания Саморегулирующийся Тепловой Кабель для Защиты от Замерзания Водопроводных Труб 1~10м Теплый Провод Вкл.

The self-regulating heating cable developed by Minco is widely used in fire protection, petroleum,chemical industry, iron and steel, electric power and so on to  keep pipes, tanks warm and prevent frostbite, roof and gutter snow melting.

Advantages:

- The cable is designed for house water pipe and solar upper water pipe freeze protection requirement in winter, to maintain the water in pipes above 0 centigrade, and do not need a controller.
- The cable is very easy to install, suit for metal and plastic water pipes.
- We use the pure copper as the conductor, and the PE jacket, it's durable, UV resist, better than PVC jacket.

Product name: water pipe heating cable/self regulating heat trace cable

Voltage: 220V 230V 240V

Power: 20w/m @10 Celsius

Length of power cord: 1.5 meter

Max working temperature: 60 Celsius

Min installation temperature: -40 Celsius

Start-up current: less than 0.6 A/m

Min. bend radius: @20C:25.4mm   @-30C:35.0mm

Cable Structure:

1. Pure copper conductor

2. PTC heating element

3. PE insulation  

Package Including:

1 x DBRK heating cable with EU-plug( Length optional)

NOTE: this cable is connected and sealed well, you can plug into 220V socket to use directly!!

Installation:

1) Wrap the heating cable on water pipes or fastening straight on pipes, both are ok. Put the whole cable on the pipes and fasten it every 30~60cm with thermal tape or aluminum tape(sold in my store).

2) Suggest to wrap a layer of rubber insulation on the pipe, enhance efficiency of the heating cable and save energy, also can protect the heating cables.

3) Plug into 220~240V. The heat trace system is finished.