LP-E6 E6N ACK-E6 DR-E6 Dummy Battery+DC Power Bank USB Cable for Canon EOS 5D Mark II III 5D2 5D3 6D 7D 60D SLR 5DS 5DSR Camera |

LP-E6 E6N ACK-E6 DR-E6 Dummy Battery+DC Power Bank USB Cable for Canon EOS 5D Mark II III 5D2 5D3 6D 7D 60D SLR 5DS 5DSR Camera |

5,0

All stars

On Canon writes the error, then if it turns on, but it can turn off and have to get the battery again, insert native, again get it and try to turn on again

This system is suitable for the following Canon digital cameras:
EOS 5D Mark II
EOS 5D Mark III
EOS 5D Mark II EF 24-105mm Kit
EOS 6D
EOS 5D Mark II (body)
EOS 5D Mark II with EF 24-105IS
EOS 60D
EOS 7D
EOS 7D (text)
EOS 7D and EF 28-135IS
EOS 7D and EF-S 18-135IS
EOS 7D Mark II

It does not apply to the following camera models:
EOS 6D Mark II
EOS 60Da
EOS 70D
EOS 5DS
EOS 5DS R.

Note: The dummy battery isn't fully decoded, When you turn on the camera, the screen will prompt you to select. After selecting "YES", it will work normally. If you select "NO", the camera will automatically turn off, you need to re-install the virtual battery, then turn on the camera and select again "YES". If you don't want to have such a prompt, choose a fully decoded dummy battery:

Important!
Please be advised, to close your camera battery door is a neccessary step to use adapter kits.

There is a little gap by the battery cartriage, open the gap rubber, let the power cable get through this gap, then you can close the battery door, then you can connect power and power on your machine.