19pcs Top Glue Pulling Tabs Works with All Slide Pullers Nickel Car Body Repair Tools+2 in 1 Dent Removel T Bar Tools | Автомобили и

19pcs Top Glue Pulling Tabs Works with All Slide Pullers Nickel Car Body Repair Tools+2 in 1 Dent Removel T Bar Tools | Автомобили и

19pcs Top Glue Pulling Tabs Works with All Slide Pullers Nickel Car Body Repair Tools+2 in 1 Dent Removel T Bar Tools

Working with 18pcs tabs,fit all kinds of dent removal,all kinds of size

2 in 1 T bar tools,a good combination,which integrates the advantages of the short T bar tool and the long T bar tool.With this,your car will be paintless

Professional grade dent pulling tab for autos;High quality tools and best price

Easy to control,ebayone can removal the dent by yourself

How to use them:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Package list :

1pcs 2in1 T bar
18pcs tabs