Hantek DSO5102B Digital storage oscilloscope 2CH 100MHz 7inch Benchtop Scopemeter 1M Memory depth 1GSa/s Sample Rate | Инструменты

{infomodule}

Description :

Professional Hantek DSO5102B 7inch 2-Channel Digital Storage Oscilloscope

Features:

200 / 100 / 60MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display,WVGA(800x480)
Record length up to 1M
Trigger mode : edge / pulse width / line selectable video / slop / overtime etc.
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis

Specification :

 

Model DSO5202B DSO5102B DSO5062B Bandwidth 200MHz 100MHz 60MHz Real-time Sample Rate 1GSa/s Equivalent Sample Rate 25GSa/s Record Length(Sample Points) Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional) SEC/DIV Range 4nS/div-40S/div (in a 2, 4, 8 sequence) Delay Time Accuracy 500ps Vertical A/D Converter 8-bit resolution, each channel sampled simultaneously VOLTS/DIV Range 2mV/div~5V/div at input BNC Position Range ±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div) Bandwidth Limit 20MHz Rise Time at BNC ≤1.7ns ≤3.5ns ≤5.8ns DC Gain Accuracy ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div Trigger Trigger Sensitivity
(Edge Trigger Type) DC : CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
EXT(Typical) 200mV from DC to 40MHz
EXT/5(Typical) 1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity Trigger Level Range CH1, CH2 : ±8 divisions from center of screen
EXT : ±1.2V EXT/5 : ±6V Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns) CH1, CH2 : ±(0.3div×V/div) (within ±4 divisions from center of screen)
EXT : ±(6% of setting + 40mV)
EXT/5 : ±(6% of setting + 200mV) Holdoff Range 100ns-10s Trigger Type Edge Trigger on the rising or falling edge Pulse Width Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s Video Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) Slope Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s Overtime from the rising or falling edge
Set Time: 20-10s Alternate Internal trigger on edge, pulse width, video or slope Measurement Cursors Manual : The difference between voltage cursors V, the difference between time cursors T,
1/T calculated by Hz.
Tracing : The voltage and time at a waveform point Automatic Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time,
Positive Width, Negative Width Display Type Right angle 7 inch TFT 16-digit color LCD Resolution 800 x 480 dots Contrast 16 gears, with the progress bar to show adjustment Interface USB host and USB slave Power Supply Voltage 100-120VACRMS(±10%), 45Hz to 440Hz,CAT II
120-240VACRMS(±10%), 45Hz to 66Hz,CAT II Power <30W Fuse 2A, T rating, 250V Mechanical Size Length : 313mm, Width : 108mm, Height : 142mm

Package includes :

1 x Professional Original Hantek DSO5102B 2-Channel Digital Oscilloscope
(Full accessories as picture shows)
Comes in color retail box.

 

 

{images}