IBOWS Heat Transfers PVC Patch Big Pineapple Stickers Washable Iron On Patches Clothes DIY Printing T-shirt Gril Bag Decoration | Дом и сад

IBOWS Heat Transfers PVC Patch Big Pineapple Stickers Washable Iron On Patches Clothes DIY Printing T-shirt Gril Bag Decoration | Дом и сад

P.S. : The patterns on the clothes are just as a reference,please according to the description size we marked.

How to use it?

A. Household iron hot stamping method

1. Adjust the iron to the cotton file (the temperature of each iron is not the same, about 150 to 160 degrees, please adjust it yourself, the hanging iron is useless, the steam iron should turn off the steam) The temperature is not well mastered In the case, it is strongly recommended to take a piece of waste cloth to test the hot, and then start ironing after the test is successful!       

2. Flatten the clothes and place them on a flat table (do not put any soft things to prevent uneven heating, resulting in damage to the clothes and the heat transfer sheet). Iron the clothes where they need to be ironed.       

3. Flatten the hot-painted piece that needs to be hot on the clothes. The hot-painted piece can be padded with a piece of paper or a thin cloth, which can play a certain protective role.       

4. Press each place for 3 to 5 seconds. Lift it up and press it again and again, back and forth 3 to 5 times, until it is pressed firmly. If it is not strong, you can press it several times. The corners must be pressed several times to prevent curling. After you have burned it, check it carefully. You can use the hand to buckle the edge of the heat to see if it is buckled. To ensure that nothing is lost, you can press the clothes one or two times in turn after ironing. In short, it is necessary to check carefully, it is difficult to remedy after washing off. Remember that after the film is uncovered, it can be covered with a film or a release paper or a thin cloth until it is firm.       

5. Wait until the film is cold and then tear it off. After 24 hours, wash it again.       

6. Dark polyester fabric can not be printed! Dark polyester fabric can not be printed! Dark polyester fabric can not be printed!

B. Heat press machine method       

160 degrees, 15 seconds cold tear.