Air disinfection Ultrasonic Atomizer Industrial 10 Head Home Humidifier Fog Machine 5Kg/H Mist Maker Fogger | Дом и сад

Air disinfection Ultrasonic Atomizer Industrial 10 Head Home Humidifier Fog Machine 5Kg/H Mist Maker Fogger | Дом и сад

null

null

Specification:

Voltage: DC48V ( cannot be connected with 220V to use directly,must be equipped with a dedicated power supplier DC 48V for using )
Power: 250W
Electric current: 5A
Amount fog: 5KG/H
Note: This machine requires the buyer to provide a 350W 48V power supply for use with it.
Product parameters:
Atomization amount: 5000ml /h
Type: ultrasonic humidifier
Use: industrial level
Water shortage protection: Yes
Voltage (V): 48V
The best working water level: 38 + 2mm
Water quality: clean tap water
List of products:
1X 10 head ultrasonic nebulizer
1x power supply

Disinfection function: If you need to sterilize rooms and warehouses, workshops, you only need to add disinfection liquid to the bucket, and then put it into the atomizing board to work. It can clean the impurities and harmful substances in the air.

The power supply of this machine is 110V and 220V. If you need 110V, please leave us a message, we will send you 110V power, thank you
Operation instructions:
1. power brown line nebulizer red line, power blue line nebulizer black line (Note: do not soak the power in the water, will damage the power)
2. the nebulizer is not directly connected to the AC220V, and the atomizer will be damaged
The
3. product is equipped with a water level sensor, and the working water level is higher than the water level sensor.
4. atomizing tablets
Product parameters:
Voltage: DC48V or AC36V (need to be equipped with rectifying board to convert DC)
Power: 250W
Size: 255*90*30mm
Protection: automatic power out of water shortage and water temperature over 50 degrees Celsius automatic protection
Power line: About 1.4m
Atomization amount: 5kg/h
Matters needing attention：
1.more adaptable to the atomization water, and the same atomizer works with pure water or tap water.
2. power supply has a wide range of applications, ensuring that the products can still be used normally when the electricity is changed greatly.
3.equipped with a power polarity protection line, which can prevent the user from damaging the product.
4. a time delay circuit is set up to avoid the damage of the line when the opening of the machine is too large.
5. the line of single sprinkler head is designed independently, and an over current protection circuit is adopted. It avoids damage to the power supply of a sprinkler's line and does not affect the normal work of other sprinklers.
6.,the current of the whole machine is less affected by voltage and temperature. Because the current of each nozzle is electronically adjusted automatically, the current will decrease with the increase of temperature. It will not affect the amount of fog. It will avoid the vicious cycle of the power tube heating and the increase of current, which will damage the nebulizer.
7. this product adopts the stainless steel shell with high corrosion resistance and high mechanical strength, which can be acid and alkali water quality.
8.the atomizer is working. Do not touch the spray above your hand. There will be tingling sensation. This is the formation of the nebulizer's working principle, and there will be some water droplets in the nebulizer, which are all normal.