PS4 Pro Slim/PS VR Move Вертикальный охладитель для зарядки контроллеров и док-станция для зарядки очков PS для серии PS4/Move.

PS4 Pro Slim/PS VR Move Вертикальный охладитель для зарядки контроллеров и док-станция очков PS серии PS4/Move.

PS4 Pro Slim/PS VR Move Vertical Cooling Stand Cooler Cooling Fan Controller Charger Charging Dock for Sony PlayStation 4 & PS VR Move Controller

√ PROFESSIONAL - It is compatible with the PS VR & PS4 / PS4 Slim / PS4 Pro gaming consoles (Being fit for 3 kinds of PS4 console) √ CONVENIENCE- It comes with two built-in high-speed cooling fans to reduce the working temperature of the console. √ SPECIALLY DESIGNED - It also supports the original Sony PS VR 3D glasses , the stand is installed above the gaming console , saving the place. √ EASILY INSTALL - It is connected with the two USB ports cable in the PS4 / PS4 Slim / PS4 Pro console for powering without needing additional power supply. √ COMPLETE FUNCTIONS - It can charge a PS4 controller and two PS Move controllers quickly in the same time. Product information: 1. Voltage: USB3.0 5V/1.5A (connected to the console via accessory USB cable) 2. Current: Maximum charging current is up to 800mA in the case of charging a single original PS4 controller;the maximum charging current is 420MA for either of the two original PS Move controllers being charged at the same time (fans are off); 3. Charging time: The original PS4 controller can be fully charged in 2.5 to 3 hours, while it takes about 3.5 to 4 hours to fully charge the original PS Move controller; 4. Maximum fan speed: 5000±10% RPM; Maximum air volume: 12.6 CFM. 5. Material: ABS 6. Accessory: USB cable. How to Use: 1. Put this product horizontally, with the Micro USB side upward, and place the PS4 console vertically on the fan stand (If the PS4 Slim console needs to be fixed with accessory screws, invert the PS4 console for installation, and then screw it tight with the accessory nuts). 2. The toggle switch in the front is used to control the built-in fan: “OFF” means turning off the cooling fan; “L” means low speed, and H means high speed. 3. Use the slot on the left to store the PS VR converter and relevant cable. 4. Use the single charger on the right of the stand for charging the PS controller. ​Package Contents: 1× Multi-functional PS Showcase Stand 1× USB cable 1× Manual Note: Console and Controller, adapter is not include.