1/5/10pcs PVC Puncture Repair Patch Glue Adhesive for Inflatable Toy Swimming Pools Float Air Bed Pool Accessories Healt | Красота и

1/5/10pcs PVC Puncture Repair Patch Glue Adhesive for Inflatable Toy Swimming Pools Float Air Bed Pool Accessories Healt | Красота и

Features:
1. Suitable for PVC inflatable products, such as inflatable swimming pool, inflatable beds, swimming rings, inflatable sofas, inflatable boats, etc. Also can be used in rubber or plastic material.
2. Strong stickiness, good repair effect.
3. After use, it is best to use a plastic film to cover the opening (such as the plastic wrap of the refrigerator) and then tighten the cover to prevent the glue from drying out quickly.
4. This repair glue can be used for repairs when accidentally scratched or pierced during use and storage.
5. One can be used many times, easy to use, convenient and portable.

Notice:
1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow 1-3cm deviation due to manual measurement.

Specification:
Type: PVC glue
Applicable range: pvc material, swimming ring, yoga ball, air cushion, rubber, plastic, PU
Shear strength: 6000MPA
Size: 5.2*1.5CM
Shelf life: 12 (months)
Working temperature: normal temperature
Viscosity: 1800-2400PCS
Curing method: naturally curing

The patching method is as follows:
Repair method of spiked damage: please drain the air in the collar first, you can use the venting tube to assist the deflation; then remove the repair glue from the repair kit, apply the repair glue with a cotton swab and evenly spread it on the damaged surface; After ensuring that the damaged part is completely covered by the repairing liquid, wait for the repairing liquid to dry. After the damaged part is air-dried, use the repairing liquid to make a 2nd application to the damaged part, and then air dry again; wait at least 6 hours after the repair is completed. Inflatable
Tear-type damage repair method: First of all, the air inside the product should be exhausted; for the tearing and scratching and other relatively large damage, we need to find a patch material from the repair kit, cut with scissors to slightly larger than the damage Place it properly or cover it without cutting; apply a repair glue evenly around the damaged area, cover the patch material that has been cut in advance, press it by hand, and evenly apply the repair glue around the patch to make the patch and damage. The seams at the site are thoroughly fuse and finally air-dried for four hours.

Choice 1:

1 x PVC repair glue

Choice 2:

5 x PVC repair glue

Choice 3:

10 x PVC repair glue